Parasound® NewClassic 2 Channel Power Amplifier
Parasound® NewClassic 2 Channel Power Amplifier 0
Parasound® NewClassic 2 Channel Power Amplifier 1
Parasound® NewClassic 2 Channel Power Amplifier 2

Parasound® NewClassic 2 Channel Power Amplifier

Model #: NewClassic 275 v.2
136802
Parasound
At a Glance
Fully discrete circuitry with high current toroid transformer. Automatic on/off by audio signal with 2 sensitivity settings. Bridging switch for stereo or mono operation. Standby, channel status and high temperature indicators.
Visit Store For Details
$899.00

Get to know this product.

  • 90 watts x 2 into 8 O (all channels driven)
  • 150 watts x 2 into 4 O or 2 O (all channels driven)
  • 200 watts x 1 bridged into 8 O or 4 O
  • 20 amps peak current per channel
  • 2 Ohm stable operation with load selector switch
  • Two pairs of speaker outputs with front panel A/B buttons
  • Rear-mounted lockout switch disables front A/B buttons
  • High pass filter, switchable for 20Hz or 40Hz
  • Automatic on/off by DC trigger with looping output
  • Automatic on/off by audio signal with 2 sensitivity settings
  • Fully discrete circuitry with high current toroid transformer
  • Bridging switch for stereo or mono operation
  • Efficient, low heat design
  • DC Servo and relay protection circuits
  • Rear-mounted left and right gain controls
  • Standby, channel status and high temperature indicators
  • Gold-plated RCA input jacks
  • Heavy duty 24k gold-plated 5-way speaker terminals
  • 115/230v selector on rear panel

Power Output - (RMS power, 20 Hz - 20 kHz) All Channels Driven

  • 90 watts x 2, 8O
  • 150 watts x 2, 4O
  • 150 watts x 2, 2O (Load switch set to 2-3O)

Bridged Mono

  • 200 watts x 1, 8O
  • 200 watts x 1, 4O (Load switch set to 2-3O)

Current Capacity

  • 20 amps peak per channel

Frequency Response

  • 20 Hz - 50 kHz, +0/-3 dB, 1 watt

Dynamic Headroom

  • 1.3 dB

Total Harmonic Distortion

  • 0.35% at full rated output
  • 0.025% at average listening levels

IM Distortion

  • 0.05 %

Transient IM Distortion

  • Not measurable

S/N Ratio

  • 110 dB at rated output, IHF A-weighted
  • 103 dB at rated output, unweighted
  • 93 dB at 2.828 V output, IHF A-weighted
  • 84 dB at 2.828 V output, unweighted

Input Impedance

  • 33 k O

Input Sensitivity

  • 800 mV for full rated output (28dB)

Inter-Channel Crosstalk

  • 80 dB @1 kHz, 72 dB @10 kHz, 65 dB @ 20kHz

Damping Factor

  • Over 150 at 20Hz

12V Trigger Turn On

  • DC 9 - 12V, 15 mA

Audio Turn On

  • Quieter: 1 mV
  • Louder: 6 mV

AC Power Requirement

  • 110 - 120 V / 220 -240 V, 50 - 60 Hz
  • 0.5 watts standby
  • 25 watts Idle (no audio)
  • 350 watts full output

Dimension

  • Height without feet: 1.75”
Specifications

Connections

Analog Audio(RCA) Output:1

Other

Speaker A/B Switching:Yes

Specifications

Power On Consumption (watts):350
Power Off Consumption (watts):0.5
Bridged Power per Channel:200
Watts RMS per Channel (4-ohms):150
Watts RMS per Channel (8-ohms):90

Misc. Specs

Depth (in.)16
Height (in.)2.5
Width (in.)17.25
Channels2
Analog Audio(RCA) Input1
Color Finish NameBlack
Product Weight (lbs.)20
ColorBlack
WarningProposition 65 Warning for California Residents