Parasound® NewClassic 2 Channel Power Amplifier
Parasound® NewClassic 2 Channel Power Amplifier 0
Parasound® NewClassic 2 Channel Power Amplifier 1
Parasound® NewClassic 2 Channel Power Amplifier 2
Parasound® NewClassic 2 Channel Power Amplifier 3

Parasound® NewClassic 2 Channel Power Amplifier

Model #: NewClassic 2250 v.2
136811
Parasound
At a Glance
Two pairs of speaker outputs with front panel A/B buttons. Automatic on/off by audio signal with 2 sensitivity settings. Fully discrete circuitry with high current toroid transformer. Bridging switch for stereo or mono operation.
Visit Store For Details
$1,799.00

Get to know this product.

  • NewClassic 2250 v.2
  • 275 watts x 2 into 8 O (all channels driven)
  • 400 watts x 2 into 4 O or 2 O (all channels driven)
  • 750 watts x 1 bridged into 8 O or 4 O
  • 45 amps peak current per channel
  • 2 Ohm stable operation with load selector switch
  • Two pairs of speaker outputs with front panel A/B buttons
  • Rear-mounted lockout switch disables front A/B buttons
  • High pass filter, switchable for 20Hz or 40Hz
  • Automatic on/off by DC trigger with looping output
  • Automatic on/off by audio signal with 2 sensitivity settings
  • Fully discrete circuitry with high current toroid transformer
  • Bridging switch for stereo or mono operation
  • Efficient, low heat design
  • DC Servo and relay protection circuits
  • Rear-mounted left and right gain controls
  • Standby, channel status and high temperature indicators
  • Gold-plated RCA input jacks
  • Heavy duty 24k gold-plated 5-way speaker terminals
  • 115/230v selector on rear panel

All Channels Driven

  • 275 watts x 2, 8O
  • 400 watts x 2, 4O
  • 400 watts x 2, 2O (Load switch set to 2-3O)

Bridged Mono

  • 750 watts x 1, 8O
  • 750 watts x 1, 4O (Load switch set to 2-3O)

Current Capacity

  • 45 amps peak per channel

Frequency Response

  • 20 Hz - 50 kHz, +0/-3 dB, 1 watt

Dynamic Headroom

  • 1.6 dB

Total Harmonic Distortion

  • 0.20% at full rated output
  • 0.015% at average listening levels

IM Distortion

  • 0.05 %

Transient IM Distortion

  • Not measurable

S/N Ratio

  • 114 dB at rated output, IHF A-weighted
  • 106 dB at rated output, unweighted
  • 93 dB at 2.828 V output, IHF A-weighted
  • 84 dB at 2.828 V output, unweighted

Input Impedance

  • 33 k O

Input Sensitivity

  • 1 V in for 28.28 V out, THX standard

Inter-Channel Crosstalk

  • 85 dB @1 kHz, 73 dB @10 kHz, 67 dB @ 20kHz

Damping Factor

  • Over 150 at 20Hz

12V Trigger Turn On

  • DC 9 – 12V, 15 mA

Audio Turn On

  • Quieter: 1 mV
  • Louder: 6 mV

AC Power Requirement

  • 110 - 120 V / 220 -240 V, 50 - 60 Hz
  • 0.5 watts standby
  • 35 watts Idle (no audio)
  • 1000 watts full output

Dimension

  • Height without feet: 5.25”
Specifications

Connections

Analog Audio(RCA) Output:1

Other

Speaker A/B Switching:Yes

Specifications

Power On Consumption (watts):1000
Power Off Consumption (watts):0.5
Bridged Power per Channel:750
Watts RMS per Channel (4-ohms):400
Watts RMS per Channel (8-ohms):275

Misc. Specs

Depth (in.)18.5
Height (in.)6
Width (in.)17.25
Channels2
Analog Audio(RCA) Input1
Color Finish NameBlack
Product Weight (lbs.)43
ColorBlack
WarningProposition 65 Warning for California Residents